Central giant cell granuloma of the jaws-long-term clinical and radiological outcomes of surgical and pharmacological management.

OBJECTIVES: To compare long-term results of different treatment modalities in central giant cell granuloma of the maxillofacial-skeleton. Primary resection may result in major defects. Alternative treatments include pharmacological agents. As yet there has been no consensus on the use of the variety of treatment options, and few studies have reported clarifying long-term results. MATERIALS AND METHODS: This retrospective study on 22 patients with 25 lesions evaluated clinical, radiological and histological features, treatment preformed and lesion recurrence. Success was defined as regression/calcification and failure as recurrence, progression or un-responsiveness. RESULTS: Of the presenting patients, 77% were under age 40. Lesion prevalence was higher in the anterior mandible and left posterior maxilla. Most cases exhibited pain, tooth-mobility or mucosal-expansion. The appearance was predominantly unilocular in the maxilla and multilocular in the mandible, which also exhibited higher prevalence of cortical perforation. Up to 80% of lesions were classified as aggressive. Intralesional steroids/calcitonin were used in 7 cases. Mean follow-up was 39.8 months. Two cases showed recurrence. In 71% of the cases treated pharmacologically, calcification/regression were observed. CONCLUSIONS: Our analysis indicates better outcomes using a combined approach, including both pharmacological and surgical treatments in large aggressive lesions. Pharmacological treatment resulted in decreased size or well-defined lesions, thus reducing the need for extensive bone resection. Dual treatment with corticosteroids and calcitonin showed no superior outcomes, but a larger cohort should be assessed. CLINICAL RELEVANCE: There are several protocols for treatment of central-giant-cell-granuloma lesions, but most are not fully established. It is important to report results that contribute to the establishment of proven protocols. This report attempts to establish the relevance of the combined approach: pharmacological treatment followed by surgical resection.

Real-time Reconstruction of Comminuted Mandibular Fractures Using 3D Printing.

Background: Comminuted fractures of the jaws are complex injuries requiring special attention. In the past, treatment included closed reduction using maxillomandibular fixation. With advancements in technology and fixation systems, open reduction became a prevalent option. These fractures are difficult to reconstruct during the primary treatment phase, thus resulting in higher complication rates. The introduction of three-dimensional (3D) planning and printing brought about superior outcomes, yet these focus on secondary reconstruction due to the need for outsourcing planning and titanium printing. Methods: In this report, we describe real-time in-house 3D planning and printing using computer-assisted design software and a 3D-fused deposition printer for virtual reduction of the comminuted fractures and printing of the reconstructed mandible. Results: Following virtual 3D reduction, the newly created mandibles were 3D printed. The model was then used to preband a reconstruction plate, which in turn was used as a template during surgery for reducing the segments. The process of virtual reduction and printing should take a couple of hours at most. The results of five cases showed good alignment and proper function. Conclusion: Three-dimensional technology can be applied in the everyday primary care treatment protocol of comminuted fractures as an in-house tool which greatly improves both functional and aesthetic outcomes.

Comparison of patient specific implant reconstruction vs conventional titanium mesh reconstruction of orbital fractures using a novel method.

To compare the reconstruction of orbital fractures using patient-specific implants (PSI) and conventional pre-formed titanium mesh; to develop a method of three-dimensional (3D) superimposition and analysis of the reconstructed orbits; and to present the pitfalls in 3D planning of orbital PSI and how to avoid them. This was a retrospective study of patients with orbital fractures who were treated in our institution between the years 2022 and 2023 using PSI or conservative prefabricated titanium mesh. Three different methods for virtual reconstruction of orbital fractures were used and are detailed with advantages, disadvantages and indications. Data acquired included age, gender, method of reconstruction, functional outcomes and aesthetic outcomes. 3D analysis for accuracy of reconstruction was performed. A total of 23 patients were included; 12 were treated using PSI and 11 using prefabricated titanium meshes. There were 8 male and 4 female patients in the PSI group comparted to 5 and 6 in the prefabricated group. All three virtual methods for reconstruction were used successfully, each with the proper indications. When comparing PSI reconstruction to conventional mesh, a significant difference in accuracy was observed; PSI cases showed an inaccuracy of 0.58 mm compared to 1.54 mm with the conventional method. Complications are presented, and tips for avoiding them are detailed. Three different methods for virtual reconstruction were used successfully; automated computerized reconstruction is used for small defects, repositioning is the superior method for non-comminuted cases while mirroring is the method of choice in comminuted fractures. 3D analysis can be performed using a novel method detailed in this report. PSI reconstruction showed superior results, indicating it should be the method of choice when possible. Pitfalls are presented and approaches to prevent them are discussed. Orbital reconstruction is a very important entity in maxillofacial surgery with crucial functional and esthetical implications, and one should use virtual planning and PSI implants, as they significantly improve outcomes.

Evaluation of parental perceptions of lingual and labial frenectomy on their child: a comparison of CO2 laser and conventional scalpel.

To evaluate parental reports of postoperative pain, improvement and satisfaction following frenectomy with scalpel versus carbon dioxide (CO2) laser treatment. Forty-nine patients aged 2-6 years with a short labial or lingual frenulum who required frenectomy were randomly assigned to undergo CO2 laser or scalpel treatment. They were divided into a labial and a lingual frenulum group based on the severity of attachment. Frenectomy was performed using a scalpel or Pixel CO2 10,600 nm laser (Alma Lasers Company, Caesarea, Israel). Postoperative follow-up was conducted via a mobile application where pain was evaluated daily using the visual analog scale (VAS) in the first 72 hours, and painkiller use was recorded. Improvement and satisfaction were evaluated at 1-month post-surgery and compared among the groups. Our results showed significant differences between the degree of clinical attachment of the frenulum, one-month postoperative improvement and satisfaction based on VAS scores (p < 0.001). Although the use of scalpel was associated with lower postoperative pain scores than the CO2 groups, VAS scores of improvement and satisfaction after 1 month were higher in the CO2 groups (p < 0.05). This study showed that although laser was associated with more postoperative pain, it showed greater improvement and higher satisfaction among patients' parents at 1 month post-surgery compared with scalpel.

Treatment of Facial Asymmetry Using Distraction Osteogenesis in a Mandible First Approach.

Background: Facial asymmetry includes several etiologies, among them trauma to the condylar area during early childhood and congenital malformations such as hemifacial microsomia. This article describes the management of facial asymmetry in adolescents and young adults using a mandible first approach by distraction osteogenesis, followed by maxillary Le-Fort I as a second stage. Methods: Eighteen patients 14-25 years of age presented with unilateral hypoplasia of the jaws which manifested clinically by deviation of the chin and canting of the occlusal plane. Etiology included hemifacial microsomia and trauma injuries at early childhood.All patients underwent orthodontic treatment and two phases of surgical treatment. Surgical treatment included unilateral mandibular distraction followed by Le-Fort I osteotomy for alignment of the maxilla. Additional bone graft in the affected side and sliding genioplasty were done as required. Results: Marked ramal elongation of 18.94 mm concomitant with mandibular forward traction of 12.5 mm was noted while achieving symmetry. In all cases, the maxilla was centered to the midline in proper occlusion. Post distraction, posteroanterior cephalometric radiographs demonstrated elongation of the affected ramus, improvement in facial symmetry, and correction of the occlusal canting. Relapse was minimal based on long-term follow-ups of 47.4 months. Conclusions: The two-stage surgical approach that includes elongation of the mandible as a first stage followed by adaptation of the maxilla is useful in correcting facial asymmetry. Using this protocol at the correct age (14-18) is very stable, as demonstrated by our results, yet one should always remember the transverse deficiency in the gonial angle requires additional bone grafting or patient specific implants.

A Comparative Study of Mucosal Wound Healing after Excision with a Scalpel, Diode Laser, or CO2 Laser.

We aimed to compare the clinical and histological secondary healing effectiveness of various types of high-level laser versus scalpel excision in mucosa frenectomy. Methods: Forty-five Sprague Dawley rats were used in this study. These rats were divided into two laser intervention groups (CO2, n = 15; diode, n = 15) and one control group with scalpel excision (n = 15). The effectiveness of therapy has been assessed based on the comparison of intraoperative, postoperative, and histological parameters on days 7, 21, and 35, and postoperative weight changes as pain indicator. Results: Both laser groups demonstrated significantly (P < 0.05) less bleeding than did the control group during the intraoperative stage, whereas the CO2 laser showed more precise cutting compared with the diode laser (P < 0.05). The highest healing score was reported in the CO2 and scalpel groups on the first week of healing than in the diode group (P < 0.05). However, no significant difference was observed between the groups on days 21 and 35. Weight loss was significantly (P < 0.05) demonstrated in the diode group compared to the scalpel and CO2 groups till day 7. Both laser groups demonstrated delayed healing process compared with the scalpel. Nevertheless, the CO2 group followed the scalpel trends after day 7. Conclusion: Scalpel and CO2 laser yielded a superior clinical outcome compared with the diode excision of oral mucosa, whereby the CO2 has been proposed as the most effective laser type at the end of the first postoperative month.

Patient-specific Implants for Treating Atrophic Mandibles.

Extremely atrophic mandibles are difficult to treat. Most patients choose to live with removable dentures. However, what if the atrophy is so extreme that spontaneous fractures occur? The objective of this report is to offer a single-stage augmentation method, which uses patient-specific crib-shaped implants (PSI) combined with autogenous free bone grafts. PSI were planned using three-dimensional (3D) segmentation and 3D virtual-planning software. Implants were designed according to the patient's mandible with a mesh-like structure and included large holes for allowing blood supply recovery. During surgery, the PSI fitted perfectly. In cases exhibiting malposition of the mandibular fragments, repositioning was performed using 3D virtual planning. When repositioning mandibular segments, the PSI served as a guide for the correct positioning. Iliac-crest bone graft was harvested and fixed as an onlay over the residual mandibular basal bone. External approach was used to avoid contamination. Six months following surgery, fixation wires were removed, and dental implants were positioned in the newly formed bone. The PSI allowed for rigid fixation, thus leading to optimal incorporation of the iliac-crest bone graft. No further augmentation was required. Bony continuity for future stability and secession of the spontaneous fractures was achieved. Dental implants were placed effortlessly. Treating extremely atrophic mandibles is an entity of its own and is considered one of the most challenging in craniofacial reconstruction. It mostly requires multiple operations with high rates of failure. We offer a novel method of 3D mandibular reconstruction, both vertically and horizontally, showing promising results and achieving enough bone for further dental rehabilitation.

The Relationship Between Morphometric Measurements, Severity, and Success of Zygomatic Arch Fracture Reduction.

PURPOSE: Identify associations between preoperative radiographic measurements and clinical findings of zygomatic arch fractures and postoperative radiographic measurements. Based on those findings, propose a comprehensive treatment algorithm for the solitary zygomatic arch fracture and combined zygomatic arch-zygomatic complex fracture. METHODS: Retrospective cohort study with patients referred to our department for zygomatic arch fractures between 2013 and 2018. Data analyzed included patient demographics, clinical evaluation, and radiographic information. Predictor variables were preoperative morphometric measurements: the initial latero-lateral (LL) defect was determined by the difference between the preoperative LL distances of the fractured and the healthy arches, LL distance was measured from the midsagittal plane in the cranium to the inner cortex of the most displaced arch segment, initial arch coronoid distances were measured from the medial part of the most dislocated arch fragment to the lateral aspect of the coronoid, and the anterior-posterior telescoping was measured as the distance between the 2 points in the arch that lost continuity and overlapped as a result of the fracture. The outcome was defined as the residual defect. It was calculated as the ratio between the postoperative remaining LL distance and the initial LL defect. RESULTS: A total of 179 cases were enrolled, all involving head residual defects. Statistical analysis was performed only on 149 medially displaced fractures. Results show that an initial LL defect larger than 3.5 mm has an 86.3% chance of remaining with a better residual defect (<84.1%), P = .001. Cases with antero-posterior (AP) telescoping > 1.45 mm showed a 72.4% chance of remaining with a poor residual defect >84% (P = .003). Arch-coronoid initial distance showed little effect on the chance of remaining with a large remining defect (P = .417, CI = 95%) CONCLUSION: Based on our results, we found that morphometric measurements can be used to predict the reduction results and can assist the clinician in choosing the optimal reduction method and thus increasing the success rate.

Trends in cleft palate incidence in the era of obstetric sonography and early detection.

BACKGROUND: The effect of improvement in prenatal identification of cleft lip or palate (CL/P) on termination of pregnancy (TOP) worldwide is scarcely reported. Our aim was to assess changes in the prevalence of cleft palate attributed to the high access and availability of prenatal advanced screening and pregnancy termination in Israel. METHODS: A retrospective study was conducted on CL/P patients which were treated in our institute and born between January 2000 and December 2018. Clinical and demographic data were extracted from medical records. Data on TOP were collected based on accessible information from the Ministry of Health. Cleft palate severity was evaluated using the Veau Classification. RESULTS: The study was conducted on 258 patients. Higher incidence of Veau II and III was evident throughout the examined period (2000-2018). However, when evaluating the incidence per year, we found that the incidence of severe cases (Veau III and IV) decreased every year showing a major decline of 60% in the last decade, whereas mild cases (Veau type I and II) demonstrated a marked increase of 90%. Regarding the incidence of abortions in Israel, a decrease of 30% was observed in the last two decades, meanwhile a substantial increase was detected in the rate of abortions related to physical malformations of the fetus. Additionally, the number of late terminations due to physical malformations significantly increased in the last decade. CONCLUSIONS: Significant decrease was observed in the incidence of severe cleft palate cases in the last decade. Concurrently, we found a substantial increase in percentage of abortions performed due to physical malformations. We suggest that these changes might be attributed to the accessibility of advanced prenatal screening and pregnancy termination in Israel under the social healthcare system.

Early antitumor activity of oral Langerhans cells is compromised by a carcinogen.

Early diagnosis of oral squamous cell carcinoma (OSCC) remains an unmet clinical need. Therefore, elucidating the initial events of OSCC preceding tumor development could benefit OSCC prognosis. Here, we define the Langerhans cells (LCs) of the tongue and demonstrate that LCs protect the epithelium from carcinogen-induced OSCC by rapidly priming αßT cells capable of eliminating γH2AX+ epithelial cells, whereas γδT and natural killer cells are dispensable. The carcinogen, however, dysregulates the epithelial resident mononuclear phagocytes, reducing LC frequencies, while dendritic cells (DCs), macrophages, and plasmacytoid DCs (pDCs) populate the epithelium. Single-cell RNA-sequencing analysis indicates that these newly differentiated cells display an immunosuppressive phenotype accompanied by an expansion of T regulatory (Treg) cells. Accumulation of the Treg cells was regulated, in part, by pDCs and precedes the formation of visible tumors. This suggests LCs play an early protective role during OSCC, yet the capacity of the carcinogen to dysregulate the differentiation of mononuclear phagocytes facilitates oral carcinogenesis.

Is Open Reduction Internal Fixation Using Titanium Plates in the Mandible as Successful as We Think?

ABSTRACT: Titanium plats are the gold-standard for fracture fixation. Titanium is considered biocompatible, corrosion resistant with an elasticity-modulus closest to bone. Nonetheless, titanium plates are not always as inherent as hoped. The authors investigated morbidity associated with titanium plates in mandibular fractures. A retrospective study of mandibular fractures treated between 2000 and 2018 using internal-fixation was conducted. Data included age, gender, complications, and location. Predictor-variable was location. Outcome-variable was plate removal. A total of 571 patients were included, 107 resulted in plate removal (18.7%). Body was the most prevalent location of fracture (29.3%). Symphysis/para-sym-physis showed the highest removal rate (24.1%), followed by body and angle (21.3/19.8%). A total of 23.4% of double-plating cases resulted in plate removal, upper-border in 15% and lower-border in 8.8%, all reconstruction-plates. Exposure was the most frequent complication leading to removal. Although titanium plates are the gold standard, almost every fifth patient returns for plate removal. Age-distribution emphasizing 41 to 50 with decrease towards extremities may imply better healing in the young and soft-tissue elasticity and less complaints in the elderly. Significantly more complications in double-plating compared to lower border suggests proximity to the oral-cavity as a risk-factor for removal. Complication rates and patterns are not negligible and perhaps should encourage clinicians to consider using biodegradable-systems for upper-border plates.

The Relationship Between Morphometric Measurments, Severity and Success of Zygomatic Arch Fracture Reduction.

PURPOSE: Zygomatic arch fractures are commonly treated by closed reduction. This kind of treatment is highly influenced by the treating surgeon and type of fracture. Thus, it is important to choose the optimal treatment for different fractures. Current treatment schemes for zygomatic arch fractures reduction are based on subjective assessments. We believe this approach should be refined. Create a new treatment algorithm for the solitary and combined zygomatic arch fractures based on radiological morphometric measurements. This will assist the clinician in tailoring a suitable treatment for each case and avoiding pitfalls, thus achieving best possible results. METHODS: A total of 179 radiologic images of patients treated in our department for zygomatic arch fractures were morphometrically measured and analyzed. RESULTS: Three variables showed a capacity to predict a large remaining defect; The presence of a preoperative esthetic defect and a large initial latero-lateral (LL) defect reduced the probability of a large remaining defect (OR = 0.289, P= .019; (OR = 0.78, P= .008; respectively). Patients with initial LL defect < 3.5 mm presented postoperative residual defect 3-times greater than patients with initial LL defect > 3.5 mm A large antero-posterior telescoping increased the probability of a large remaining defect (OR = 1.27 P= .003). Cases that had antero-posterior telescoping > 1.45 mm had a 72.4% probability of remaining with a poor residual defect > 84.1% (P= .003). CONCLUSIONS: Based on our results we believe that the use of morphometric measurements is important when assessing zygomatic arch fractures. We found that there are measurements that can be used to predict esthetic and functional defects, as well as probability of resolving them. Morphometric measurements can be used to predict the reduction difficulty and can assist the clinician in choosing the optimal reduction method and thus increasing the success rate.

Postextraction Mucormycosis in Immunocompromised-Patient Management and Review of Literature.

PURPOSE: Mucormycosis is an uncommon aggressive, opportunistic infection that can produce widespread orofacial tissue necrosis. This primarily affects immunocompromised individuals. It is the deadliest and most rapidly progressing type of human-affecting fungal infection. The aim of the study is to investigate the diagnostic criteria and treatment approach in 10 cases of mucormycosis in the author's institute from 2008 to 2019. Moreover, a review of the English literature presents all cases of mucormycosis after tooth extraction. MATERIALS AND METHODS: Ten patients at our institute have been treated. They were evaluated and discussed as per their diagnostic criteria, surgical treatment, and mortality rates. RESULTS: All 10 immunocompromised patients had a primary hematologic malignancy. The criteria for a positive diagnosis were clinical symptoms and a biopsy for microbiological culture and histologic analysis. Each patient was subjected to vigorous surgical resection and underwent antifungal treatment. Seven patients died because of their main disease. Owing to the unregulated spread of mucormycosis, 2 patients died. Four cases were diagnosed after maxillary tooth extraction. CONCLUSIONS: The most important factor for patient survival tends to be the management of the underlying disease with early detection and active surgical and antifungal action. Four of 10 cases diagnosed with mucormycosis appeared after tooth extraction, a relatively high number compared with the literature. Therefore, it is the dental profession's obligation to be familiar with the possibility of the potentially severe and possibly fatal complication.

Trends in Burn Injuries in Northern Israel During the COVID-19 Lockdown.

Coronavirus disease 2019 obliged many countries to apply lockdown policies to contain the spread of infection. The restrictions in Israel included limitations on movement, reduction of working capacity, and closure of the educational system. The present study focused on patients treated at a referral center for burns in northern Israel. Their goal was to investigate temporal variations in burn injuries during this period. Data were retrospectively extracted from the medical records of burn patients treated at our hospital between March 14, 2020 and April 20, 2020 (ie, the period of aggravated lockdown). Data from this period were compared with that from paralleling periods between 2017 and 2019. During the lockdown and paralleling periods, 178 patients were treated for burn injuries, of whom 44% were under 18. Although no restrictions were enforced during the virus outbreak period with regard to seeking medical care, we noticed a decrease in the number of patients admitted to the emergency room for all reasons. Of particular interest was a 66% decrease in the number of adult burn patients (P < .0001). Meanwhile, among the pediatric population, no significant decrease was observed. Nonetheless, subgroups with higher susceptibility to burn injuries included children aged 2 to 5 years (56.3% vs 23.8%, P = .016) and female patients from all pediatric age groups (57.1% vs 25%, P = .027). These findings may be explained by the presumably busier kitchen and dining areas during the lockdown. Overall, the study results can assist with building a stronger understanding of varying burn injuries and with developing educational and preventive strategies.

A life-threatening floor of the mouth hematoma secondary to explantation attempt in the anterior mandible.

Implant dentistry is considered to be a safe and routine surgical procedure. However, cases of life-threatening hematoma of the floor of the mouth resulting in airway obstruction were previously reported as a complication of implant placement in the anterior mandible. Massive bleeding in this anatomical site may be caused by perforating the lingual cortex and/or damaging the lingual perimandibular vessels. In the long term, dental implants can fail, mainly due to peri-implantitis, and must be removed. Explantation procedure may occasionally become a complex challenge, with a risk for various complications.
Case report: This report presents the first case of life-threatening hematoma of the floor of the mouth, as a complication secondary to a failed attempt of dental implant removal at the anterior mandible. The proximity of the implant to the lingual vascular canal might have served as a cause for vascular damage during explantation.
Conclusions: Implant removal complications are scarcely described in the literature. Nonetheless, damaging blood vessels during explantation should not be underestimated. Computed tomography (CT) may be of value not only in preoperative implant planning but also before implant removal in jeopardized anatomical zones such as the anterior mandible. Lingual vascular canals should be looked for on computed tomography scans.

Extramaxillary Zygomatic Implants: An Alternative Approach for the Reconstruction of the Atrophic Maxilla.

BACKGROUND: Limited bone quality in the posterior maxilla results in low success rates for dental implants. Various bone augmentation methods have been described, yet most require two-step surgical procedures with relatively high rates of resorption and failure. An alternative for these patients is zygomatic implants. Zygomatic implants utilize the basal craniofacial bone. MATERIALS AND METHODS: A retrospective study was conducted on 25 patients exhibiting ridges classified as V-VI according to the Cawood and Howell classification. Seventy-six extramaxillary zygomatic implants were placed. Immediate rehabilitation was performed with a mean follow-up of 18.6 months. RESULTS: Three implants failed, and two were replaced successfully. No significant bone loss was observed in the rest of the implants. Soft tissue around the implant heads healed properly. All implants were prosthetically rehabilitated successfully. CONCLUSIONS: Zygomatic implants allow for immediate loading of an atrophic maxilla. The emergence of the implant is prosthetically correct compared to the intrasinus approach, leading to better dental hygiene and decreased mechanical resistance. 96.1% of the implants survived, with good anchorage and proper soft tissue healing and rehabilitation. We suggest using extramaxillary zygomatic fixture as the first line of treatment in severe atrophic maxilla.

3D Planning and Printing of Patient Specific Implants for Reconstruction of Bony Defects.

We are in the midst of the 3D era in most aspects of life, and especially in medicine. The surgical discipline is one of the major players in the medical field using the constantly developing 3D planning and printing capabilities. Computer-assisted design (CAD) and computer assisted manufacturing (CAM) are used to describe the 3D planning and manufacturing of the product. The planning and manufacturing of 3D surgical guides and reconstruction implants is performed almost exclusively by engineers. As technology advances and software interfaces become more user-friendly, it raises a question regarding the possibility of transferring the planning and manufacturing to the clinician. The reasons for such a shift are clear: the surgeon has the idea of what he wants to design, and he also knows what is feasible and could be used in the operating room. It allows him to be prepared for any scenario/unexpected results during the operation and allows the surgeon to be creative and express his new ideas using the CAD software. The purpose of this method is to provide clinicians with the ability to create their own surgical guides and reconstruction implants. In this manuscript, a detailed protocol will provide a simple method for segmentation using segmentation software and implant planning using a 3D design software. Following the segmentation and stl file production using segmentation software, the clinician could create a simple patient specific reconstruction plate or a more complex plate with a cradle for bone graft positioning. Surgical guides can be created for accurate resection, hole preparation for proper reconstruction plate positioning or for bone graft harvesting and re-contouring. A case of lower jaw reconstruction following plate fracture and nonunion healing of a trauma sustained injury is detailed.

Direct on-the-spot detection of SARS-CoV-2 in patients.

IMPACT STATEMENT: Humanity is currently experiencing a global pandemic with devastating implications on human health and the economy. Most countries are gradually exiting their lockdown state. We are currently lacking rapid and simple viral detections, especially methods that can be performed in the household. Here, we applied RT-LAMP directly on human clinical swabs and self-collected saliva samples. We adjusted the method to allow simple and rapid viral detection, with no RNA purification steps. By testing our method on over 180 human samples, we determined its sensitivity, and by applying it to other viruses, we determined its specificity. We believe this method has a promising potential to be applied world-wide as a simple and cheap surveillance test for SARS-CoV-2.